Sewer hose guides
- for the lower sewer shaft edge
- with plastic insert
- for sewer diameters starting from 300 mm (KSFA)
- for sewer diameters of approx.150 - 300 mm (KSFB)
Suction pipe without folder
- suction pipe made in aluminium DN 100 (4”) / DN 110 (4 1/2”) / DN 125 (5”) / DN 15 (6”)
- with Perrot or Bauer coupling
- approx. 1 m long
- integrated air supply duct for more suction depth
Suction pipe with folder
- suction pipe made in aluminium DN 100 (4”) / DN 110 (4 1/2”) / DN 125 (5”) / DN 15 (6”)
- with Perrot or Bauer coupling
- approx. 1 m long
- with removable butterfly (folder) for dry sewers
- to back up water in the sewer shaft
- beneficial for dry sewers or for low water level canals when working with water recycling
- supports working with water recycling
- integrated air supply duct for more suction depth
Suction hoses
- rubber or plastic
- diameters DN 75-180 (3"-7")
High-pressure hoses
- rubber or plastic
- diameters DN 13-38 (1/2"-1 1/2")
Nozzles
For sewer cleaning vehicles with and without water recycling
"Bluestar" General nozzle
Precision engineered and manufactured of wear-resistant tempered steel with one forward jet and blind plug (interchangeable) included, the General is a perfect nozzle for preventative maintenance and all-around sewer cleaning
Two different water jet angles (15 and 25 degrees) provide strong traction and highly efficient cleaning.
- Optimized hydro mechanics
- Replaceable, threaded stainless steel nozzle inserts
- Rear water jet angles 15° and 25°
- 1/2", 3/4", 1" and 1 1/4" hose connection possible (bushing from accessories)
- optionally with ceramic inserts
Length: 70 mm | Diameter: 45 mm | Inserts: R: 6x M6 ISK / FJ M6 ISK | Jets: 15°/25° | Min. flowrate: 40 l/min | Pipe: 100 - 250 mm | Weight: 0,7 kg
Length: 70 mm | Diameter: 45 mm | Inserts: R: 6x M6 ISK / FJ M6 ISK | Jets: 15°/25° | Min. flowrate: 40 l/min | Pipe: 100 - 250 mm | Weight: 0,7 kg
Length: 150 mm | Diameter: 80 mm | Inserts: R: 8x M10x1 ASK / FJ M10x1 ISK | Jets: 15° / 25° | Min. flowrate: 200 l/min | Pipe: 150 - 400 mm | Weight: 4,1 kg
"Bluestar" Power Pull
Precision engineered and manufactured of wear-resistant tempered steel, the Power Pull Nozzle is an ideal tool for some of the toughest applications. The 7 degree jet provides tremendous traction and cleaning performance in mountainous, difficult terrain. This is a great nozzle to clean and remove sand, silt and large debris from sewer lines.
- Optimized hydro mechanics
- Replaceable, threaded stainless steel nozzle inserts
- Rear water jet angle 7°
- Perfect for broaching the sole
- 1/2", 3/4", 1" and 1 1/4" hose connection possible (bushing from accessories)
- optionally with ceramic inserts
Length: 70 mm | Diameter: 45 mm | Inserts: 6x M6 ISK / FJ M6 ISK | Jets: 7° | Min. flowrate: 40 l/min | Pipe: 100 - 200 mm | Weight: 0,7 kg
Length: 113 mm | Diameter: 60 mm | Inserts: 8x M10 ASK | Jets: 7° | Min. flowrate: 90 l/min | Pipe: 100 - 300 mm | Weight: 1,4 kg
Length: 150 mm | Diameter: 80 mm | Inserts: 8x M10x1 ASK | Jets: 7° | Min. flowrate: 200 l/min | Pipe: 150 - 300 mm | Weight: 4,0 kg
"Bluestar" Penetrator nozzle
Precision engineered and manufactured of wear-resistant tempered steel, the Penetrator Nozzle is specifically designed to successfully navigate over small voids in pipes.
Eight individual 12 degree water jets provide tremendous traction and cleaning performance. An optional pulling eye is available. Also perfect for cleaning egg-shaped pipes. For bigger pipes, a larger version is also available.
- Optimized hydro mechanics
- Replaceable, threaded stainless steel nozzle inserts
- Rear water jet angle 12°
- 3/4" 1" and 1 1/4" hose connection possible (bushing from accessories)
- optionally with ceramic inserts
Length: 200 mm | Diameter: 80 mm | Inserts: R: 8x M10x1 ASK / FJ M10x1 ASK | Jet: 12° | Min. flowrate: 200 l/min | Pipe: 150 - 400 mm | Weight: 7,0 kg
Length: 250 mm | Diameter: 100 mm | Inserts: R: 8x M10x1 ASK / FJ M10x1 ASK | Jet: 12° | Min. flowrate: 300 l/min | Pipe: 300 - 1.200 mm | Weight: 14,0 kg
"Bluestar" Spear nozzle
Precision engineered and manufactured of wear-resistant tempered steel, the Spear Nozzle is a bigger, heavier version of the Arrow Nozzle to cut, break and remove total blockages rapidly with its 4 strong concentrated forward jets, drill point and sharp edges in larger pipes.
- Heavy duty construction
- Drill point can be replaced with an additional nozzle insert
- Replaceable, threaded stainless steel nozzle inserts
- Rear water jet angle 23°
- Front water jet angle 15°
- optionally with ceramic inserts
Length: 190 mm | Diameter: 74 mm | Inserts: R: 6x SW14 ASK / FJ 4x M8 ASK / 0° M10x1 ASK | Jets: 0° / 15° / 23° | Min. flowrate: 230 l/min | Pipe: 200 - 600 mm | Weight: 2,8 kg
"Bluestar" Stealth nozzle
Precision engineered and manufactured of wear-resistant tempered steel. The Stealth’s two different water jet angles of 12 and 18 degrees (four jets each) provide powerful traction and effective cleaning performance to remove sand, silt and obstructions from sewer or stormlines.
Stealth nozzles are ideally suited for all-round cleaning of pipes up to Ø DN 600mm.
- Optimized hydro mechanics
- Replaceable, threaded stainless steel nozzle inserts
- Rear water jet angles 12° and 18°
- optionally with ceramic inserts
Length: 190 mm | Diameter: 100 mm | Inserts: R: 8x SW14 ASK | Jets: 12° / 18° | Min. flowrate: 230 l/min | Pipe: 200 - 600 mm | Weight: 8,0 kg
"Bluestar" Flounder nozzle
Precision engineered and manufactured of wear-resistant tempered steel, the Flounder nozzle is an excellent tool to clean the floor of pipes. The smooth design with rounded edges provides the nozzle with great gliding capability.
- Replaceable, threaded stainless steel nozzle inserts
- Rear water jet angle 75°/20°
- with ceramic inserts
Length x Width x Height: 150 x 90 x 40 mm | Inserts: 4x M8 ASK | Jets: 5° / 20° | Min. flowrate: 60 l/min | Pipe: 150 - 300 mm | Weight: 2,0 kg
Length x Width x Height: 190 x 100 x 50 mm | Inserts: 6x M8 ASK | Jets: 0° / 5° / 20° | Min. flowrate: 230 l/min | Pipe: 300 - 600 mm | Weight: 5,2 kg
"Bluestar" Anti Blower nozzle
Precision engineered and manufactured of wear-resistant tempered steel, the specially designed water jet angles of this nozzle - in conjunction with reduced pressure - effectively eliminates blown toilets.
- Optimized hydro mechanics
- Replaceable, threaded stainless steel nozzle inserts
- Rear water jet angle 36°
- 1/2", 3/4", 1" and 1 1/4" hose connection possible (bushing from accessories)
- with ceramic inserts
Length: 68 mm | Diameter: 45 mm | Inserts: R: 6x M6 ASK / FJ 1x M6 ISK | Jet: 0°/25° | Min. flowrate: 40 l/min | Pipe: 75 - 200 mm | Weight: 0,7 kg
Length: 113 mm | Diameter: 60 mm | Inserts: R: 8x M8 ASK / FJ 1xM6 ISK | Jets: 0°/36° | Min. flowrate: 90 l/min | Pipe: 100 - 300 mm | Weight: 1,7 kg
Length: 150 mm | Diameter: 80 mm | Inserts: R: 8x M10x1 ASK / FJ M10x1 ISK | Jets: 36° | Min. flowrate: 200 l/min | Pipe: 150 - 400 mm | Weight: 4,0 kg
"Bluestar" Emperor nozzle
Precision engineered and manufactured of wear resistant tempered steel. The Emperor’s two different water jet angles of 15 and 30 degrees (six jets each) provide highly effective cleaning performance and traction in large sewer and stormlines.
- Optimized hydro mechanics
- Replaceable, threaded stainless steel nozzle inserts
- Rear water jet angles 15° and 30°
- 1" and 1 1/4" hose connection possible (bushing from accessories)
- with ceramic inserts
Length: 190 mm | Diameter: 110 mm | Inserts: 12x SW14 ASK | Jets: 15° / 30° | Min. flowrate: 300 l/min | Pipe: 300 - 800 mm | Weight: 9,0 kg
"Bluestar" Power Pull large nozzle
Precision engineered and manufactured of wear-resistant tempered steel, the Power Pull Nozzle is an ideal tool for the toughest applications. Its pattern of narrow, 7 degree water jets provides tremendous traction and cleaning performance in mountainous, difficult terrain. It’s a proven nozzle which cleans and removes sand, silt and large debris from sewer lines.
- Optimized hydro mechanics
- Replaceable, threaded stainless steel nozzle inserts
- Rear water jet angle 7°
- 3/4" 1" and 1 1/4" hose connection possible (bushing from accessories)
- with ceramic inserts
Length: 190 mm | Diameter: 100 mm | Inserts: 8x SW14 ASK | Jets: 7° | Min. flowrate: 230 l/min | Pipe: 200 - 600 mm | Weight: 7,7 kg
"Bluestar" Bigfoot nozzle
The Bigfoot Nozzle utilizes Optimized 3D Hydro Mechanics to convert the water coming from a pressurized sewer hose into unrivaled cleaning power.
The roll over bars allow the nozzle to upright itself in the line. All rear water jets are concentrated on the bottom of the pipe to remove large debris, sand, silt, sludge etc. The Bigfoot Nozzle can be used in tandem with an additional Bigfoot Nozzle for large sewer lines or culverts and is available in four different sizes (6, 8, 10 or 14 jets).
- Optimized 3D Hydro Mechanics
- Replaceable, one-piece threaded ceramic nozzle inserts
- Rear water jet angles 5° - 20°
- Operating pressure up to 4000 PSI
- Reduced water consumption reduced running costs
Length: 445 mm | Inserts: 6x SW14 | Min. flowrate: 200 l/min | Pipe: 300 - 800 mm | Weight: 15 kg
Length: 445 mm | Inserts: 8x SW14 | Min. flowrate: 230 l/min | Pipe: 400 - 900 mm | Weight: 18 kg
Length: 445 mm | Inserts: 10x SW14 | Min. flowrate: 230 l/min | Pipe: 500 - 1.400 mm | Weight: 24 kg
